Parts for Aerial Lifts - Aerial platform lifts might be used to accomplish many different duties done in hard to reach aerial places. Many of the odd jobs associated with this style of jack include performing regular maintenance on structures with prominent ceilings, repairing phone and power cables, lifting burdensome shelving units, and pruning tree branches. A ladder could also be utilized for many of the aforementioned jobs, although aerial hoists provide more safety and stability when correctly used.
There are several versions of aerial hoists available on the market depending on what the task required involves. Painters often use scissor aerial hoists for instance, which are classified as mobile scaffolding, useful in painting trim and reaching the 2nd story and higher on buildings. The scissor aerial platform lifts use criss-cross braces to stretch and extend upwards. There is a table attached to the top of the braces that rises simultaneously as the criss-cross braces raise.
Cherry pickers and bucket trucks are a different variety of the aerial lift. Usually, they contain a bucket at the end of an extended arm and as the arm unfolds, the attached bucket lift rises. Platform lifts utilize a pronged arm that rises upwards as the handle is moved. Boom hoists have a hydraulic arm that extends outward and raises the platform. Every one of these aerial lifts require special training to operate.
Through the Occupational Safety & Health Association, also called OSHA, instruction programs are offered to help make certain the workers meet occupational values for safety, system operation, inspection and maintenance and machine weight capacities. Workforce receive qualifications upon completion of the course and only OSHA certified employees should operate aerial platform lifts. The Occupational Safety & Health Organization has established guidelines to uphold safety and prevent injury when utilizing aerial platform lifts. Common sense rules such as not using this piece of equipment to give rides and making sure all tires on aerial hoists are braced in order to hinder machine tipping are noted within the rules.
Unfortunately, figures expose that greater than 20 aerial hoist operators die each year when operating and almost ten percent of those are commercial painters. The majority of these mishaps were triggered by improper tie bracing, for that reason many of these might have been prevented. Operators should make certain that all wheels are locked and braces as a critical security precaution to stop the device from toppling over.
Marking the surrounding area with noticeable markers have to be used to protect would-be passers-by in order that they do not come near the lift. Moreover, markings should be placed at about 10 feet of clearance between any power lines and the aerial hoist. Lift operators should at all times be well harnessed to the hoist while up in the air.
Click to Download the pdf